, 11, 12, 13, IN)| ALPTEC 7000 | ||
| Portable Electrical Network Analyzer | ||
| Portable electrical network analyzer allowing acquisition and processing of data | |
| For measurement on AC and DC networks, single and multi-phase, LV and HV | |
| Includes a complete computer (P.C.™) with a Pentium™ processor | |
| Runs under Windows™ environment | |
| Storage of measurements on included hard disk or on floppy disk | |
| Measurement and storage of 298 R.M.S. values | |
| Measurement and storage up to harmonics 62 in voltages, currents, phases and powers | |
| Detection of the sign of each harmonic | |
| Measurement and storage of all kinds of voltage and current events | |
| Default detection in R.M.S. values, harmonics and transient events simultaneously | |
| Up to 91 active triggers simultaneously | |
| Fast sampling: up to 31,25 kHz per channel (2 channels) or 7,81 kHz per channel (8 channels) | |
| Detection of phase rotation (graphical display) |
Parameters displayed on RMS screen
| Voltages | From 0 to 999 MV RMS |
| Currents (, 11, 12, 13, IN) |
From 0 to 999 MA RMS |
| Power factors | From –1 TO +1 |
| Tangentø | From 0 to 999 |
| Frequency | DC and from 45 to 65 Hz |
| Active, reactive and apparent powers | From 0 to 999 GW/Gvar/G VA |
| Active energy (Wh), | |
| Reactive energy (varh) | From 0 to 999 Gwh/Gvarh |
| Real time display of 12 selected measurements with a 90 seconds record | |
Harmonic mode:
| Measurement on 3 phases, in voltage and current simultaneously, up to harmonic 62 in modulus, phase and global distortion level: |
| On active, reactive and apparent powers for each harmonic |
| Of phase between one harmonic and the fundamental |
| Of phase between one voltage harmonic and the same current harmonic |
| Graphical and numerical display, in absolute and relative values |
Scope mode
| Allows displaying the waveforms of voltages and currents simultaneously |
| Capture voltage and current defaults with programmable triggers |